8115L four-wheel drive wheel loader provides power and capacity for large-scale work, but also has a compact design that allows access to hard-to-reach areas. Three steering modes (four-wheel drive, two-wheel drive and crabbing) are electronically synchronized and provide maximum maneuverability in all work environments. Load tall trucks and elevators with a height of 11 feet, 11 inches hinge pin height.
Financing available, private and commercial.
For more information, contact Pascal at 819-347-4252.
This 2008 Yanmar VIO55, comes with three quick attach buckets and hydraulic thumb, with 95% good rubber traction. Radio and air conditioning. Only 3800 Hours! Excellent condition, one owner.
Asking price: $ 52,500
Financing available, private and commercial.
For more information, contact Pascal at 819-347-4252.
This 1997 Kubota L1802DT-M tractor with manual transmission is equipped to work in the woods. With only 473 hours on the clock it is ready to work. It is also equipped with several hydraulic outlets. Two chains on two rear wheels and a new battery.
Asking price: $ 6500
For more information, contact Sylvain at 819-452-4255.
This Yanmar VIO35 2010 is ready to work, comes with 2 buckets, quick hydraulic coupler and a hydraulic thumb. Oil changes are done. Only 1717.5 hours!
Asking price: $ 39,000.00
Financing available, private and commercial.
For more information, contact Pascal our sales representative at 819-347-4252.
This Skid Steer Yanmar T175 of the year 2014 has new tractions, all maintenance has been done. This machine has air conditioning, the hi-flow. 68.4 forces at the engine and a total weight of 8600 lbs, can lift up to 128 inches and the capacity to lift 1800 lbs.
Financing available, private and commercial.
For more information, contact Pascal at 819-347-4252
Yanmar YT235 35 HP Excavator Tractor Quick attach, hydrostatic, 3 speed range, THE ONLY TRACTOR BUILT WITH A REAL IRON FRAME, DIESEL 4X4, 10 Year Warranty motorcycle propeller, 2 years bumper to bumper. Looking for something that can handle bigger and harder tasks, look no further than the Yanmar YT235 / 235C. Comfortable and easy to use, the YT235 uses the power you expect from a much larger machine. When the job demands that you work, regardless of the weather or weather conditions, the YT235C with a fully air-conditioned taxi controlled by the climate. Large cabin, also available without cabin.
Financing available, private and commercial.
For more information, contact Pascal at 819-347-4252.
Resumption of financing on this 1999 Tigercat comes with a Log Max 6000 2015 harvester head with more or less 5000 hours. Machine hours are unknown.
Financing available, private and commercial.
For more information, contact Sylvain at 819-452-4255.
This snowblower is manufactured by a Canadian company, which offers several sizes. The offered sizes are 46 '' inches up to 120 '' inches.
Financing available, private and commercial.
For more information, contact Pascal at 819-347-4252.
The Komatsu PC 128 of the year 1998 at 10600 hours on the clock. Comes with two buckets. The traction and traction motors, chains, sprockets and rollers have been redone and only have 1000 hours of use. All oils have been changed and possibility of installing a hydraulic thumb. This shovel weighs 28,000 lbs.
Financing available, private and commercial.
For more information, contact Pascal at 819-347-4252.
This mini digger Vio 35 of the year 2010 has 2553 hours. It also comes with two buckets, with quick hydraulic attachment and a hydraulic thumb. The rubber tractions are good at 70%, all the oils have been changed and ready to work.
Financing available, private and commercial.
For more information call Pascal at 819-347-4252.
Part number: 043023 Qty: 1 Description: Left hand roller arm cmpl.
Share number: 043094 Qty: 1 Description: V-Steel Roller Feed
Share number: 043095 Qty: 1 Description: V-Steel Roller Feed
Part number: 609067 Qty: 2 Description: Hydraulic motor, cmpl
Part number: 014360 Qty: 1 Description: Quick bracket
Serial number: 3452- Qty: 1 Description: Junction box
Part number: 013765 Qty: 1 Description: Cylinder cmpl. (Tilt)
Part number: 609018 Qty: 1 Description: Saw motor
Part number: 013203 Qty: 3 Description: Cylinder cmpl. Lower knife and roller arms
Part number: 015462 Qty: 1 Description: Cylinder mease. Wheel
Part number: 015669 Qty: 1 Description: Saw cylinder cmpl.
Part number: 015286 Qty: 2 Description: Cylinder cmpl.
Part number: 611084 Qty: 1 Description: Valve L-90
Part number: 015479 Qty: 1 Description: Wheelarm complete
Price upon request.For more information, contact the parts department at 819-822-3382, ask Jonathan or Sonya!
This mid-range dumper has a payload capacity of 6,600 lb (3 tonnes), material handling and standard hydrostatic all-wheel drive. The hydrostatic transmission system benefits from user-friendly controls and eliminates the need to replace worn gears. The 3001 delivers superior performance while the drive system provides torque when and where you need it. With no clutch, the hydrostatic transmission eliminates the high costs of parts and labor associated with the replacement of these components. ROPS and heated cab versions available.
Whatever the goals of the job, the BULL series is more than powerful. You'll find the power, precision handling and comfort to make the longest days shorter. Attack heavy loads with a standard, center-mounted, 2-inch receiver type hitch capable of towing up to 1,500 pounds. Plus, enjoy a spacious interior and Electronic Power Steering (EPS) available that will make you feel like the king of the field. For more information, contact Pascal Fréchette at 819-347-4252. Financing available, private and commercial.
Electric tipping trailer with a 12 volt adapter for control up and down. Available in red and black and different sizes.
Price upon request.
Financing available, private and commercial.
For more information, contact Pascal Fréchette at 819-347-4252.
The Walco-Renegade double-axle hydraulic tipper trailer with a load capacity of 4000 lbs. The hydraulics stretched to their maximum, at a 60-degree angle for spill. Also available with a single axle as a special order.
Price upon request.
Financing available, private and commercial.
For more information, contact Pascal Fréchette at 819-347-4252.
The Walco model W-699, offers several widths and heights. Ideal for extending any type of land.
Price upon request.
Financing available, private and commercial.
For more information, contact Pascal Fréchette at 819-347-4252.
The heavy-duty grader box is equipped with double beveled, reversible knives made of hardened steel ½ "x 6". Forged and heat treated teeth. The maximum curvature of the teeth ensures a good digging capacity. Heavy-duty boxes are also available in several widths.
Price upon request.
Financing available, private and commercial.
For more information, contact Pascal Fréchette at 819-347-4252.
Walco Whistler W-5.5 trimmers are available from Les Équipements Marquis. Variety of sizes ranging from 4' to 10'.
Price upon request.
Financing available, private and commercial.
For more information, contact Pascal Fréchette at 819-347-4252.
1999 Prentice 620FB harvester 24 000 hours used. Five hydraulic pumps rebuilted in 2018, motor rebuilted in November 2018 and one traction motor has been changed. Comes with a Logmax 7000 harvester head.
Contact 819-452-4255 for the price, Financing available
Kubota M95x tractor with a Kesla 204T timber crane. Chains on all 4 wheels and forestry protections. Possibility of adding a trailer or a delimber. This machine is in good working condition.
Asking price: 59 500$ financing available
This 80XLE utility loader from Barko has a telescopic boom ranging from 24 feet to 27 feet. Weight of 5985 lbs.
Price upon request.
Financing available, private and commercial.
For more information, contact Sylvain Thompson at 819-452-4255
Frontal SB52 snow blower for tractors skid steers or loaders. Almost new, 52 inches wide, comes with the complete kit, PTO, hydraulic attche, hudraulic chute
Price: 4950$ plus taxes, financing available, private and commercial.
Brand new Autix80 hydraulic snow blower, reversible so it can blow while pushing or pulling, 80 inches wide. **The loader was sold we are only selling the snow blower.
Price demanded, $14,500.00 financing available, private and commercial.
For more information, contact Pascal at 819-347-4252.
YANMAR SV100 harvester with Afm 35 or Kesla 20SH harvester head. The price vs production level of this machine is by far the best on the market and offers a great business opportunity. For any additional information contact Sylvain Thompson at 819-452-4255. Financing available Here is a video of an Sv100 with AFM 35
Front loader Metal pless T80LX-1104-2425 brand new.
Asking price: 8500$ financing available, private and commercial.
For more information, contact Pascal at 819-347-4252.
Woodworking 650 harvester head, completely reconditioned. New motor, pin bushing and other reparations were done. Also comes with complete head for pieces. Needs a computer, perfect for project or a beginners. Contact Tom at 819 822-3382
17500$ financing available
Skid Steer YANMAR S190R, 2017, only 70 hours used, cabin, air cond, like new.
Asking price 44 500$ Financing available, private and commercial.
For more information, contact Pascal at 819-347-4252.
New 50'' lawn mower, can be installed on any equipment with hydraulic outlet.
$13 000.00 Financing available, private and commercial.
For more information, contact Pascal at 819-347-4252.